Blog · Research

DigiTwinPlan – Digital Building Twin from Planning to Operation

In the joint project DigiTwinPlan we are developing a digital building twin that connects simulation-based planning and energy-efficient operation end to end.

VICUS Team · · 1 min read

Co-funded by the European Union and the Free State of Saxony

Buildings consume a large share of energy, and much of the potential for efficiency is lost already during planning or later in operation. In the joint project DigiTwinPlan we close this gap: a digital building twin is meant to connect the planning, simulation and operation of a building end to end.

Our Goals

To this end, VICUS Software is further developing its planning and simulation software. The goals are:

  • generic building models that allow variants to be evaluated quickly and with little modelling effort,
  • the creation of digital twins that can be used from design through to building operation,
  • significantly better usability for planning offices, so that energy simulation becomes a standard tool in everyday planning.

As a result, planners should be able to develop energy-efficient building concepts earlier and on a sounder basis, and operators should be able to verify and secure the planned efficiency in real operation.

Project Details

Consortium partners:

  • EA Systems Dresden GmbH
  • IPROconsult GmbH
  • VICUS Software GmbH
  • Fraunhofer Institute for Integrated Circuits IIS, Division Engineering of Adaptive Systems

Duration: 01.09.2025 – 31.12.2027

Funding

The project is co-funded by the European Union from the European Regional Development Fund (ERDF) and supported by the Sächsische Aufbaubank – Förderbank – (SAB). The total cost of our sub-project is EUR 271,969.58, of which EUR 163,181.74 is covered by the funding.

This measure is co-financed with tax funds on the basis of the budget passed by the Saxon State Parliament.

Try VICUS yourself

Download the current version or let us show you the software in a demo.

More posts

All posts →

· VICUS Districts

VICUS 2.1: Automatic Network Report & ALKIS Download

VICUS Districts 2.1 creates the planning report for a heat network at the push of a button, downloads ALKIS data directly and checks the whole network against its pressure limits.

· VICUS Buildings

Webinar Recap: VICUS Buildings in 30 Minutes

Recording and summary of our VICUS Buildings release webinar from 23 April 2026 — with a feature overview and the most important questions from the audience.

Stay up to date

New features, tutorials and updates delivered to your inbox.